Service Areas
Maryland, MD
Virginia, VA
Washington, DC
Montgomery County
Frederick County
Prince Georges County
Ashton
Beallsville
Bethesda
Boyds
Brinklow
Brookeville
Burtonsville
Cabin John
Chevy Chase
Clarksburg
Colesville
Damascus
Darnestown
Derwood
Dumfries
Fairfax
Frederick
Gaithersburg
Germantown
Glen Echo
Hyattsville
Ijamsville
Kensington
Laytonsville
Montgomery Village
Mount Airy
New Market
North Bethesda
North Potomac
Olney
Poolesville
Potomac
Rockville
Sandy Spring
Silver Spring
Takoma Park
Washington Grove
West Bethesda
West Friendship
Wheaton
Woodbine
Time For Pressure Washing?
Click For Our TV Commercial!
Testimonial
"I am very satisfied with the service of Henry's housework. They quality and level of service is exceptional and I sincerely appreciate their prompt response to my request to replace roof tiles. In today's society, I find the level of work ethics and customer service has declined in a variety of professions. Henry's Housework is the exception to the rule. Please accept my appreciation Henry, and to Nichole of your staff for a quality job."
Evelyn Lee, Silver Spring MD
We do not recommend staining decks with any surface film forming stain agents or painting of any type of deck due to uneven wear pattern on the surface. Most of these paint and stain agents have a tendency to wear or peel off due to weathering and foot traffic.
Sometimes this can happen as fast as one year after application. For this reason, Henry's Housework uses high quality penetrating stain agents like Ready Seal.
A tinting agent may extend the life of the stain used and offer more protection from the sun’s UV rays but it should still be maintained about every two years. However, when it is re-stained it may become darker each time it receives stain and it can be difficult for even experienced companies or home owners to get the stain to blend in without faded or discolored areas (especially if you don't know the exact brand of stain and tint used).
Take a little time to protect the yard plants and lawn around the deck. Sun Brite Supply has lightweight inexpensive paper-poly drop-cloths that will prevent stainer from landing on vegetation. Sealer blocks the pores of vegetation, so the leaf cannot breathe. Cover up and be safe. NOTE: Never use sheet plastic over vegetation. On a sunny day, plants can fry within minutes.
If there are any fuzzies on the wood, use a sanding sponge with medium grit (or a brass wire brush, an Osborne brush, or a de-felting pad) to go over the entire area. This step will help assure professional looking results.
Remember that Ready Seal is made with inert oil that contains no sugars or starches. We caution you to avoid any stainer that contains linseed oil (even in small amounts, linseed oil supports the growth of mildew with its natural sugars and starches). We also caution you about using any stainer without superior UV protection. That includes all clear stainers. Generally speaking, darker stainant colors contain more UV protection. Ready Seal contains some of the finest pigments available today, combined with exclusive resins that help the stain be absorbed completely into the wood very quickly. Ready Seal is permeable, which means it allows the wood to breathe naturally but will not allow moisture drops to enter the wood.
Using a good brush with white china bristles, apply the stainer along the edge of the deck nearest the house. Cover about 12” to 18” out from the house, being very careful to feather the edges so that you avoid a straight, visible line where the brushing stops and the spraying will begin. Cutting-in the edge like this allows you to begin spraying away from the house, minimizing your clean-up at the end of the job. Many contractors spray the entire deck, avoiding the extra labor needed for cutting-in by using sheet plastic or a flexible painter’s shield to protect the house from spray.
A DECKSTER sprayer is the quickest method to apply Ready Seal when used by a professional. On a windy day, the Hurricane Brush will be the fastest way to apply Ready Seal without creating a clean-up headache. Ready Seal can also be applied with a pump-up sprayer, but that is more labor-intensive and a less-even application than you get when using a DECKSTER. You may also use a brush or roll it, but those methods are more labor-intensive and usually don’t get the stainer on to the sides of the boards like the sprayer does.
Take time to protect any patio under the deck. Sealer that drips onto concrete is extremely difficult to remove later on. If you spray the stainer, also protect plants and house surfaces. If you must clean up spilled stainer or overspray, use mineral spirits or denatured alcohol. Mineral spirits is the best all-around cleaner, while denatured alcohol works very well for cleaning it off glass.
Two light coats (applied wet-on-wet) are much better than one heavy one. Once the first coat of stainer has been on the wood for at least 15 – 30 minutes, it will accept a moderate second coat. Once the second coat of stainer has been on the wood for about 20 minutes, the wood has absorbed all it will take. If there are any wet or shiny spots visible, they can be wiped with a clean rag or back-brushed with a flat stain pad to remove them.
Ready Seal is really goof-proof. That means that you won’t get lap marks or runs, and it means that rainy weather can’t mess it up. The stained wood is ready to stand up to rain within about 15 minutes after applying Ready Seal. The deck is ready to use immediately, while the stainer continues to dry beneath the surface of the wood for about 2-3 weeks.
Expect the color of the newly-stained wood to be somewhat darker that the color sample indicated. The wood may also have a slightly splotchy appearance. The color will lighten considerably and even out over the next two weeks or so. The color will continue to lighten gradually, depending on use and exposure to sun. Typically, this process should be repeated every two years or so to maintain optimal appearance and protection.